国产三级精品三级在线专1,色噜噜狠狠一区二区三区果冻,香港经典a毛片免费观看hd

耐壓/絕緣分析儀7730
產品編號：02984
產品名稱：耐壓/絕緣分析儀
產品型號：7730
訂貨編號：
市場 價：¥21370.00
促銷 價：
狀態：
產 地：臺灣鏵儀
簡要參數：

耐壓/絕緣分析儀，耐壓AC 0～5.000kV、0.000～30.00mA，DC 0～5.000kV、0～10.000mA，絕緣50～1000VDC、0.05～50000MΩ。
人氣：1418

相關推送

瀏覽記錄

耐壓/絕緣分析儀7730

¥21370.00

產品介紹

產品特點

高頻式脈寬調變技術設計
自動偵測輸入電源電壓 115/230V
大型240×64 Graphic LCD 窗口
可于同一畫面下完整的顯示所有的設定參數或量測數值
測試功能確認設定(Verification)
自動提示訊息功能(Prompt)
快速放電線路 (專利:104990)
可設定校正日期-時間的預警功能
內建50組程序記憶、每一組30個測試步驟，可于一次設定連續測試
全范圍電壓輸出穩壓率在1%以?xún)?nèi)
鍵盤鎖定功能
內含防高壓觸電線路Smart GFI (專利:169000)
簡單易懂的人機界面
可外接標準GPIB/RS232/Prind Card界面作控制
內建PLC Remote遙控界面
量測速度快，準確度高
體積小 2U(430mm×89mm×400mm)、重量輕(13Kg)
可于背板選配直流小電流接地阻抗量測功能范圍0~2KΩ(Continuity)
可選購內建4CH或8CH高壓矩陣掃描儀

技術參數

SPECIFICATIONS
MODEL	7730
AC WITHSTAND VOLTAGE
	Range	Resolution		Accuracy
Output Voltage, ACV	0-5000	1		±(2% of setting+ 5V)
Output Frequency	50Hz/60Hz ±100ppm, User Selection
Output Waveform	Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation	± (1% of output + 5V), From no load to full load
SETTINGS
Maximum Limit current, mA	0.000 - 9.999 (0=OFF)	0.001		± (2% of setting + 2 counts)
	10.00-30.00	0.01
Minimum Limit current, mA	0.000 - 9.999 (0=OFF)	0.001		± (2% of setting + 2 counts)
	10.00-30.00	0.01
Ramp-Up Timer, second	0.1 - 999.9	0.1		± (0.1% + 0.05 sec)
Ramp-Down Timer, second	0.0 - 999.9
Dwell Timer, second	0, 0.4 - 999.9 (0=continuous)
Arc Detection	1 - 9 ranges (9 is the most sensitivity)
DC WITHSTAND VOLTAGE
Output Voltage, DCV	0-5000	1		±(2% of setting+ 5V)
Output Ripple	<4 %（5KV/10mA at Resistive Load）
SETTINGS
Maximum Limit, current, μA	0 - 999.9	0.1		± (2% of setting + 2 counts)
	1000 - 10000	1
Minimum Limit, current, μA	0.0 - 999.9	0.1		± (2% of setting + 2 counts)
	1000 - 10000	1
Ramp-Up Timer, second	0.1 - 999.9	0.1		± (0.1% + 0.05 sec)
Ramp-Down Timer, second	0, 1.0 - 999.9 (0=OFF)
Dwell Timer, second	0, 0.4 - 999.9 (0=continuous)
Ramp-HI, current	>12 mA peak maximum, ON/OFF User Selection
Charge-LO, current	0.0 - 350.0 μA DC or Auto Set
Discharge Time	< 200 msec
Maximum Capacitive LoadDC Mode	1 μF < 1KV 0.08 μF < 4KV
	0.75 μF < 2KV 0.04 μF < 5KV
	0.5 μF < 3KV
Arc Detection	1 - 9 ranges (9 is the most sensitivity)
INSULATION RESISTANCE
Output Voltage, VDC	50 - 1000	1		± (2% of setting + 2 counts)
Short Circuit Current	Maximum >12mA peak
SETTINGS
Maximum and Minimun Limit Resistance, MΩ	0.05 - 99.99(Max – Limit: 0 = OFF)	0.01		Same as Resistance MEASUREMENT Accuracy
	100.0-999.9	0.1
	1000-50000	1		± (0.1% + 0.05 sec)
Ramp-Up Timer, second	0.1 - 999.9	0.1
Ramp-Down Timer, second	0, 1.0 - 999.9 (0=OFF)
Delay Timer, second	0, 1.0 - 999.9 (0=continuous)	0.1
Charge-LO, current, μA	0.000 - 3.500 or Auto Set
MEASUREMENT
	Range	Resolution		Accuracy
Voltage, KV (AC/DC)	0.00-5.00	0.01		± (1.5% of reading +2counts)
Voltage, Vdc (IR only)	0-1000	1		± (1.5% of reading + 2counts)
AC Current, mA	0.000-3.500	0.001		± (2% of reading + 2counts)
	3.00-30.00	0.01
DC Current, μA	0.0 - 350.0	0.1		± (2% of reading + 2 counts)
DC Current, mA	0.300 - 3.500	0.001
	3.00-9.99	0.01
Resistance, MΩ	50-499V	500-1000V		50 – 499V 0.05–999.9, ±(7% of reading+2 counts)
	0.050-1.999	0.050-9.999	0.001	500 – 1000V
	2.00-19.99	10.00-99.99	0.01	0.10–999.9, ±(2% of reading+2 counts)
	20.0-199.9	100.0-999.9	0.1	1000–9999, ±(5% of reading+2 counts)
	200-50000	1000-50000	1	10000–50000, ±(15%of reading+2 counts)
GENERAL
Input Voltage	115/230Vac±15% Auto Selection, 50/60Hz ± 5%, Fuse 4A Slow-Blo 250VAC
PLC Remote Control	Input: Test, Reset, Interlock, Recall Memory 1 through 10
	Output: Pass, Fail, Test-in-Process, Reset Out
Remote Output Relays	125VAC@1AAC, 30VDC@ 0.5ADC
Memory	50 memories, 30 steps/memory
Graphic Display	240 x 64 dot resolution Monographic LCD /Contrast 9 Levels 1-9
Safety	Built-in Smart GFI circuit,GFI trip current 450μA max, HV shut down speed: <1mS
Interface	Standard RS232, Optional PrinterPort with Date and Time Stamp or GPIB (IEEE-488.2).
Security	Programmable password lockout capability to avoid unauthorized access to test set-up program.
Alarm Volume Setting	Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.
Calibration	Adjustments are made through the fornt panel. Built-in Verification program.
	Automatic Calibration alert function to signal operator when calibration is due.
Environment	0-40℃, 20-80%RH
Dimensions/Net Weight	(W × H × D) 2U (430 × 89 × 400 mm)/13Kg.
Option (Opt.735)	DC Continuity Test Function (0.1A/ 0-2KΩ) at Rear Panel
STANDARD ACCESSORIES
Power Cord(10A)	×1
Fuses	×2 (Including a spare contained in the fuse holder)
Interlock Disable Key(1505)	×1
Hipot Test Lead ,1.5m(1101)	×1
Hipot Return Lead ,1.8m(1102)	×1
RS232 Link Cable 1.5m(1130)	×1
MATRIX SCANNER MODULE (Opt.729)
High Voltage Rating	5KVAC/5KVDC
Number of HV Channel	8
MATRIX SCANNER MODULE (Opt.730)
High Voltage Rating	5KVAC/5KVDC
Number of HV Channel	4
DC CONTINUITY TEST FUNCTION (Opt.735)
MEASUREMENT
	Range	Resolution		Accuracy
Output Current	DC 0.1A ± 0.01A, Max.
Resistance Display	0.00 – 19.99	0.01		± (1 % of reading + 5 counts)
	20.0 – 199.9	0.1		± (1 % of reading + 2 counts)
	200 – 2000	1		± (1 % of reading + 2 counts)
SETTINGS
Max-Limit, Ω	0.00 – 19.99	0.01		± (1 % of setting + 5 counts)
	20.0 – 199.9	0.1		± (1 % of setting + 2 counts)
	200 – 2000	1		± (1 % of setting + 2 counts)
Min-Limit, Ω	0.00 – 19.99	0.01		± (1 % of setting + 5 counts)
	20.0 – 199.9	0.1		± (1 % of setting + 2 counts)
	200 – 2000	1		± (1 % of setting + 2 counts)
Dwell Timer, second	0.0, 0.3 – 999.9 (0 = continuous)	0.1		± (0.1% + 0.05 sec)
Resistance Offset, Ω	0.00 – 2.00	0.01		± (1 % of reading + 5 counts)

国产一区二区-最新欧美精品一区二区三区-奇米777四色影视在线看-偷窥自拍性综合图区-国产精品久久久久久久福利

耐壓/絕緣分析儀7730